Eventide BD600E+ MicroPrecision Rackmount Broadcast Delay w/ Expanded Remote
Product Information
The BD600E+ offers an unprecedented 80 seconds of the highest quality revenue and license-protecting delay – twice as much as other delays. You have the flexibility to customize the delay buffer length from four seconds to the full 80 seconds. Dump can be customized in 1/2 second increments up to 10 seconds. Each time the DUMP button is pressed, only one segment is deleted. For example, if a unit is set to the full 80 seconds of delay buffer, and is set up to provide 8-second dumps, you will have ten separate dump segments. Pushing the DUMP button the first time cuts out one 8-second segment. You still have 72 seconds of delay protection. If this is followed by more trash-talk, push the DUMP button again and you still have over a minute of delay protection. The “sneeze” button momentarily “edits” audio entering the delay, allowing the host to sneeze, cough, or make a short comment without being heard on-air – and without dead air. Your station cannot afford to work without a net. With the BD600E+, you will never worry about running out of delayed memory.
Features
- Microprecision delay mode for HD synchronization
- 80 seconds of delay protection
- USB Remote Control
- “Panic” allows WAV file play back during delay rebuild
- 24-bit AES/EBU digital I/O, with optional wordclock sync
- 24-bit analog XLR I/O
- User-defined “dump” length segmentation
- “Sneeze” button for momentary edit
- Remote control capability
- Easy-to-wire euroblock for remote hookup (on base unit)
- RS-232 I/O
- Programmable I/O
- Remote option offers 16 bi-polar opto-isolated inputs and 16 open-collector outputs
Specifications
Analog Inputs
- Audio Input Connectors
- XLR pin 2 hot, true differential balanced, +4 dBm nominal
- Input Impedance
- 20K ohms bridging
- Full Scale Input Level
- +26dBu
- Dynamic Range
- >104dB
- THD+N
- <0.003 @ 1kHz, -3dBFS
- Crosstalk
- <-100dB @ 20Hz to 20kHz, -1dBFS
Analog Outputs
- Audio Output Connectors
- XLR pin 2 hot, true differential balanced, +4 dBm nominal
- Output Impedance
- 20K ohms bridging
- Full Scale Output Level
- +65dBu
- Dynamic Range
- >108dB
- THD+N
- <0.003 @ 1kHz, -3dBFS in stable delay state
- Crosstalk
- <-100dB @ 20Hz to 20kHz, -1dBFS
- SNR
- 108dB
Recorded Signal Specs
- Frequency Response
- Live or Bypass: 20Hz-20kHz +- 0.1dB
- HD Microprecision Delay mode 10Hz-19kHz +- 0.25dB
- Broadcast Profanity Delay mode 10hZ-20kHz +- 0.1dB (while delay is changing 10Hz-19kHz +- 1.5dB)
- Profanity Delay Maximum Length
- Can be set to 4, 6, 8, 12, 16, 20, 30, 40, 60, or 80 seconds
- Micro Precision Fixed Delay
- Can be set from .010 seconds to 9.999,999 seconds in microsecond steps
Remote Control Connectors and Interfaces
- Remote Control Inputs
- RS-232 control input and output
- USB Remote Control
- Basic Remote
- 4 configurable inputs (closure to ground)
- 2 relay-isolated status outputs
- Optional Extended Remote
- 16 bi-polar opto-isolated inputs
- 16 open-collector outputs
- RS-232 input and delayed output
- Compact Flash Interface
- Supports Type I and Type II Compact Flash cards for .WAV sample playback and software update
