Korg ARP 2600 M Semi Modular Synthesizer Synth Mini w/ Case
Product Information
When the ARP 2600 FS was announced in January 2020, it quickly became a phenomenal success with musicians all over the world recognizing the faithfulness to the original ARP 2600.
The ARP 2600 M is around 60% the original size, making it lighter, more portable and easier to place and use in a studio. It integrates the same analog circuitry and components as the ARP 2600 FS, thus faithfully reproducing the characteristic ARP sound.The new ARP 2600 M is not only faithful to the original, it also includes an array of added features that will make it even easier to use:
– Plug and play: Connect any class compliant MIDI controller such as a KORG microKeys, nanokeys or SQ-64 to one of the ARP 2600 M’s USB ports (USB-A and USB-B) and automatically get full control of your instrument!
– Resized: The new size makes it easier to visualize your patch and also allows you to use shorter patch cables
– Two types of filters from two versions of the original ARP 2600（4012 type, 4072 type DIN MIDI IN added
– Pitch-bend, Modulation and Portamento ON/OFF can be controlled through MIDI CC messages (USB/DIN MIDI)
– Normalized voltage: The threshold of the trigger signal required to activate the ADSR through the S/H GATE JACK has become 5V, making it much easier to use in combination with other gear such as volcas or Eurorack modules
– Improved Attack and Release time ratios
– L/R Stereo Output Jack (instead of XLR)
– Speakers turn automatically off when using headphones
– Improved, smoother sliders
Specifications
- Operating temperature range
- 0 – +40 °C (non‐condensing)
- Maximum Polyphony
- 2 voices for duo phonic; normally monophonic
- VCO-1 (Voltage Controlled Oscilator 1)
- Waveforms
- Sawtooth, square
- Frequency range
- Approx. 0.03 Hz – 30 Hz (low freq. mode)
Approx. 10 Hz – 10 kHz (audio mode)
- Voltage controlled response
- 1V/oct.
- VCO-2 (Voltage Controlled Oscillator 2)
- Waveforms
- Sawtooth, pulse (dynamic pulse), triangle, sine
- Frequency range
- Approx. 0.03 Hz – 30 Hz (low freq. mode)
Approx. 10 Hz – 10 kHz (audio mode)
- Pulse width
- 10% – 90%
- Voltage controlled response
- 1V/oct.
- VCO-3 (Voltage Controlled Oscilator 3)
- Waveforms
- Sawtooth, pulse (dynamic pulse)
- Frequency range
- Approx. 0.03 Hz – 30 Hz (low freq. mode)
Approx. 10 Hz – 10 kHz (audio mode)
- Pulse width
- 10% – 90%
- Voltage controlled response
- 1V/oct.
- VCF (Voltage Controlled Filter)
- Type
- Low-pass (TYPE I : early 24 dB/oct., TYPE II: late 24 dB/oct.)
- Frequency range
- Approx. 10 Hz – 10 kHz
- Resonance
- 1/2 – self oscillate
- VCA (Voltage Controlled Amplifier)
- Control voltage
- AR type (internally connected)
ADSR type (internally connected)
- Noise generator
- Noise spectrum types (white and pink)
- RING MODULATOR
- Type
- Analog multiplier
- Input signal (Internally connected)
- VCO-1 sawtooth wave, VCO-2 sine wave
- SAMPLE & HOLD
- Sampled signal
- Noise (internally connected)
- AUDIO OUTPUT JACKS
Front Panel (LEFT, RIGHT OUTPUT jacks
- Connector
- φ3.5 mm monaural phone jack
- Maximum output level
- +9 dBu @ 10 kΩ load
- Output impedance
- 1.2 kΩ
- Side Panel
- Connector
- φ6.3 mm monaural phone jack
- Maximum output level
- +4 dBu @ 600 kΩ load
- Output Impedance
- 1.2 kΩ
- HEADPHONES JACK
- Connector
- φ6.3 mm stereo phone jack
- Maximum output level
- 50 mW + 50 mW @ 33Ω load
- Output impedance
- 20Ω
- EXTERNAL AUDIO INPUT (PREAMPLIFIER INPUT) JACK
- Connector
- φ3.5 mm monaural phone jack
- Maximum input level
- +2dBu *RANGE x10, GAIN knob Max(
- Input impedance
- 100kΩ
- MIDI connector
- IN
- USB port
- Type A, Type B
General
- Power supply
- AC power supply terminal (KA320)
- Power consumption
- 13W
- Dimensions
- (W × D × H)
- 520 × 129 × 311 mm / 20.5 x 5 x 12.2 inches,
- Weight
- 5.9 kg / 13 lbs.
- Included Items
- Road case, AC power cord (KA320), patch cables, Owner’s manual, ARP sticker
- Accessories (Sold separately)
- microKEY2 series, SQ-64 amongst others
